Smart device

[Solved] Galaxy Watch that won’t turn on? Here’s What to Do (2023)

Galaxy Watch that won't turn on

Introduction

Do you have a Galaxy Watch that won’t turn on? If you encounter a Galaxy Watch that is not working, it can be frustrating trying to figure out how to fix the problem. Fortunately, there are some steps you can take before heading to a more complex repair process. In this guide, we’ll discuss how to fix a Galaxy watch that won’t turn on with a few simple solutions. Before getting started, make sure that you have all of the necessary tools for the job:

-A Phillips screwdriver
-A soft cloth
-Replacement adhesive strips
-An electrostatic discharge (ESD) wrist strap
-A multimeter or a continuity tester
-Tweezers and other small tools

By following these easy steps, you should be able to diagnose and fix your Galaxy Watch so it will work perfectly once again!

Troubleshooting

If your Samsung Galaxy Watch isn’t turning on, don’t panic. There are a few steps you can try to get your watch up and running again. In this article, we’ll be taking a look at some of the troubleshooting methods for a Galaxy Watch that won’t turn on. Let’s get started and see if we can help you get your watch back to life.

Check the battery

If your Galaxy watch won’t turn on, the first step is to check the battery. Make sure that it is not completely drained and that it has enough charge for your watch to turn on. To check the battery level of your Smartwatch:

• Press and hold the Power key until you hear a beep or until the Smartwatch vibrates.
• The Battery level will be shown on the display.

If your watch has enough charge but still won’t turn on, try plugging your watch into a charger for at least 10 minutes. If this does not work, move on to try a reset of your device.

Check the charging port

Before any troubleshooting, make sure that the Galaxy Watch is not just out of battery and needs to be recharged. Check the charging contacts on both the watch and the charger, ensuring that any dust or debris is removed. If they’re still clean and free from dirt, it’s time to check the charger.

If you have access to a different charger, such as one from another device or a laptop USB port, try using that instead. It could be that the original charger is faulty or may not be sufficiently charging your device.

If none of these precautions prove successful at turning on your Galaxy Watch, it could indicate a hardware fault with either the battery itself or other components. It is advised to refer to an authorized Samsung service center for further investigations if no visible signs of damage are present in order to determine any underlying issues causing your device to refuse power-up.

Reset the watch

Galaxy Watch that won't turn on

If you’re having trouble getting your Samsung Galaxy Watch to turn on, resetting the watch is often a simple way to find a solution. Resetting the watch can fix minor issues such as a stuck display or a corrupted operating system that is preventing the device from turning on.

Instructions for resetting a Galaxy Watch vary slightly depending on whether it is connected to an Android or iOS device.

For Android Devices:
1) Disconnect your watch from your phone and place it on its charger.
2) Press and hold the Home Button (located at 2 o’clock) together with the Back Button (located at 4 o’clock). Keep them held until you hear two beeps and see the Samsung logo appear twice.
3) Release both buttons when you hear two beeps, then immediately press and hold them again until you see the screen change. You may need to do this several times before your watch restarts. Be sure not to release both buttons while repeating this step!
4) Wait for your Galaxy Watch to reboot itself then reconnect with your phone using Bluetooth. Your watch should now be powered up and ready for use!

For iOS Devices:
1) Open iPhone Settings > Bluetooth > Tap Forget This Device under Samsung Galaxy Watch (name of the device). This will disconnect the watch from iPhone. Then tap Forget Device again when it reappears in the Bluetooth settings list.
2) Place your Galaxy Watch on its charger and press down three buttons () simultaneously for 10 seconds – the top button (at 2 o’clock), the bottom button (at 8 o’clock), & Power button (side button). Your Galaxy Watch will reboot and then run through the set-up process like when the first time unpacked new out of the box.
3) Re-pair and then connect to iPhone by following the instructions in ‘Connecting Gear S3 & 4 with Bluetooth’. Once connected, power up your galaxy look once again after it’s paired via Bluetooth with your iPhone.

Advanced Troubleshooting

If your Samsung Galaxy Watch will not turn on, first try resetting the watch by pressing and holding the Power button for 10 seconds. If this fails to work, try charging the watch for at least an hour. If it still does not turn on, it could be due to more complex issues. Advanced troubleshooting needs to be done in order to fix the problem. Let’s look into what needs to be done.

Check the power button

One of the biggest culprits, when a Galaxy Watch won’t turn on, is a problem with the power button. The power button is located on the side of the watch and pressing it will usually get your device working again. To properly check this, you’ll need to use a small Phillips head screwdriver to open up your watch.

Once opened, make sure that the power button is secure and firmly connected. You can try to wiggle it slightly to check if that helps. If not, try holding down the power button for 10-15 seconds to attempt a hard reboot or reset. You can also disconnect and reconnect the battery cable as another possible fix — just remember how it was when you started so you can reconnect it correctly!

Another thing you’ll want to check is if there are any loose wires or other debris obstructing your power button’s functionality. Using some compressed air might help shift any debris away from these components and free up any connections. Finally, plugging in your watch with its USB cable may also help jumpstart any processes that need a bit of extra juice — this will only work if your device still has some charge left in its battery though!

Check the software

The most common cause of your Galaxy Watch not turning on may be that the software or firmware needs to be updated. To check for new updates on your device, open the Galaxy Wearable app on your phone, then select About watch > Update watch software. If a new version is available, follow the prompts to install it.

If an update isn’t available or if updating doesn’t fix the issue, you may need to perform a factory reset of your device. WARNING: This will erase all data stored on the watch — make sure you back up any data you don’t want to lose before doing this!

To factory reset your Galaxy Watch, go into Settings > General > Reset and tap Factory data reset. You will be prompted to enter a PIN code —the default code is 0000— then follow the steps to complete the reset. Afterward, set up your device as you did originally.

Check the hardware

If your Galaxy Watch won’t turn on, the first step is to check the hardware. Is the battery charged? Have you tried restarting the watch? If you’ve done these two things and it still isn’t working, it’s time to move on to some more advanced troubleshooting steps.

It could be that your watch needs a new battery, or perhaps some other physical parts are not functioning properly. If a newly charged battery does not work, you may need to try resetting the charging contacts by using a toothpick or other fine-tipped tool to carefully clear away any debris blocking the connections. You can also try re-inserting and then removing the battery several times in succession in order to reestablish contact between its terminals and those of the watch.

If you think the problem with your watch may be something more than just a dead battery or blocked connection points, consult your local electronics repair shop for advice and recommendations. They may be able to replace faulty components or offer further tips on getting your device up and running again.

Conclusion

In conclusion, if your Galaxy Watch is not turning on, try the following solutions: reset your watch to factory settings, charge your watch for at least 30 minutes, and make sure the battery is not drained. If none of these solutions work, contact Samsung Support for more assistance.

Having a Galaxy Watch that won’t turn on can be a frustrating experience. Fortunately, there are simple solutions available to help you fix the issue and get back to using your smartwatch in no time!

Frequently Asked Questions

What should I do if my Galaxy Watch is not turning on?

A: If your Galaxy Watch is not turning on, first try charging it fully. If that doesn’t work, try performing a hard reset by pressing and holding the power button and home button simultaneously for 10-15 seconds.

What if my Galaxy Watch is still not turning on after a hard reset?

A: If your Galaxy Watch is still not turning on after a hard reset, try performing a factory reset. Keep in mind that a factory reset will erase all data from your watch.

How do I perform a factory reset on my Galaxy Watch?

A: To perform a factory reset on your Galaxy Watch, go to Settings > General > Reset > Factory Reset. Follow the on-screen instructions to complete the process.

What if my Galaxy Watch still won’t turn on after trying all of these solutions?

A: If your Galaxy Watch still won’t turn on, there may be a hardware issue. Try contacting Samsung support or taking your watch to a repair shop for assistance.

How long should I wait after charging my Galaxy Watch before attempting to turn it on?

A: It is best to allow your Galaxy Watch to charge for at least 30 minutes before attempting to turn it on. However, the exact amount of time may vary depending on the specific model and the current battery level.

TRC

About Author

You may also like

Smartwatches
Smart device

Fix your smart watch in just 5 simple steps!

  • January 1, 2023
There are many variations of passages of Lorem Ipsum available but the majority have suffered alteration in that some injected
Fitbit Versa 3 Alternatives
Smart device

Fitbit Versa 3 substitutes: Our top picks

  • January 1, 2023
There are many variations of passages of Lorem Ipsum available but the majority have suffered alteration in that some injected